Fibaro FGB-002 Bypass 2 Z-Wave LED Bulb Dimmer

FIBARO Walli Dimmer is a smart wall dimmer designed to control light source via Z-Wave network.

It measures active power and energy consumed by the controlled load.

You can install it with provided cover plate and switch button or other compatible.

Can be used for dimming:
110/230V operated conventional incandescent and halogen,
12V operated ELV halogen lamps and dimmable LED bulbs (with electronic transformers),
12V operated MLV halogen lamps (with ferromagnetic transformers),
dimmable LED bulbs,
dimmable compact fluorescent CFL tube lamps,
supported dimmable light sources (power factor > 0.5) with minimal power of 5VA using FIBARO Bypass 2.
Can be used for switching:
compact fluorescent CFL tube lamps with electronic ballast,
fluorescent tube lamps with electronic ballast,
LED bulbs (power factor > 0.7),
supported light sources (power factor > 0.5) with minimal power of 5VA using FIBARO Bypass 2.
Uses different operating modes:
„Trailing edge” for resistive loads (R)
„Trailing edge” for resistive-capacitive loads (RC)
„Leading edge” for resistive-inductive loads (RL)
Can be used with FIBARO Walli covers or other compatible (see “Parts compatibility”):
GIRA – System 55 (Standard 55, E2, Event, Event Clear),
Legrand – Céliane,
Schneider – Odace.
Active power and energy consumption metering.
Can be installed in two and three-wired configuration.
Calibrates automatically to the connected light source.
Supports Z-Wave network Security Modes: S0 with AES-128 encryption and S2 Authenticated with PRNG-based encryption.
Works as a Z-Wave signal repeater (all non-battery operated devices within the network will act as repeaters to increase reliability of the network).
May be used with all devices certified with the Z-Wave Plus certificate and should be compatible with such devices produced by other manufacturers.